Regular maintenance helps keep your White-Westinghouse dehumidifier running efficiently and extends its lifespan.
Follow these steps to clean and maintain your unit:
1. Safety Precautions
Unplug the Dehumidifier: Ensure the unit is completely powered off and unplugged from the electrical
outlet before beginning any cleaning or maintenance tasks.
2. Clean the Exterior
Use a Soft Cloth: Wipe down the exterior of the dehumidifier with a soft, dry cloth to remove dust and
debris. For stubborn dirt or stains, dampen the cloth with a mild detergent solution and gently wipe the
surface.
3. Clean the Water Tank
Remove the Water Tank: Depending on the model, detach the water tank from the dehumidifier.
Empty and Rinse: Empty any collected water from the tank and rinse it with clean water. Use a soft brush or
cloth to clean the inside of the tank, especially around the edges and corners where mold or residue may
accumulate.
Allow to Dry: Let the water tank air dry completely before reattaching it to the dehumidifier.
4. Clean the Air Filter
Locate the Air Filter: Refer to your user manual to locate the air filter, usually located near the air intake.
Remove the Filter: Depending on the model, slide out or unscrew the air filter from its housing.
Vacuum or Wash: If washable, rinse the filter under lukewarm water with mild soap. Gently shake off
excess water and let it air dry completely before reinstalling. If non-washable, use a vacuum cleaner with a
brush attachment to remove dust and debris.
Replace Filter (if applicable): If the filter is disposable or has reached the end of its lifespan, replace it with
a new filter according to the manufacturer’s recommendations.
5. Clean the Coils and Interior
Vacuum or Brush: Use a soft brush or vacuum cleaner with a brush attachment to remove dust and debris
from the coils and interior components of the dehumidifier. Be gentle to avoid damaging the coils.
6. Check Drainage and Drainage Hose (if applicable)
Inspect Drainage System: Ensure the drainage port and hose (if applicable) are clear of any obstructions or
buildup that could impede water flow.
Clean if Necessary: Use a small brush or pipe cleaner to clear any debris from the drainage port or hose.
7. Inspect Overall Condition
Check Power Cord: Inspect the power cord for any signs of wear or damage. If damaged, replace the cord
immediately to prevent electrical hazards.
Check for Leaks: Inspect the dehumidifier for any signs of leaks or water damage. Address any issues
promptly to prevent further damage to the unit or surrounding area.
8. Reassemble and Test
Reassemble the Dehumidifier: Once all components are clean and dry, reassemble the dehumidifier
following the manufacturer’s instructions.
Test Operation: Plug in the dehumidifier and test its operation to ensure everything is functioning properly.
Monitor the unit for any unusual noises or performance issues.
Maintenance Schedule:
Regular Cleaning: Clean the air filter and exterior surfaces every 1-2 weeks, or more frequently during
periods of heavy use or high humidity.
Deep Cleaning: Perform a more thorough cleaning, including the water tank and internal components, every
3-6 months.
Annual Maintenance: Schedule an annual inspection or maintenance check by a qualified technician to
ensure the dehumidifier continues to operate efficiently and safely.
By following these cleaning and maintenance guidelines, you can help ensure that your White-Westinghouse
dehumidifier operates at peak performance, effectively controls humidity levels, and maintains a healthier indoor
environment.
For further assistance or information on maintaining your dehumidifier, feel free to contact us at:
Email: inquiry@jetindia.co.in
